8345R Tractor

Tractor 8345R — in desire for more!

Amazing performance, one of the best and most isolated cabins in its class (rating of the TÜV Süd as of October 2013), an optimal level of comfort, high profitability and maximum reliability — these features, in Your words, matter most. And You’ll find it in the latest 8345R tractors from John Deere.

The maximum power of the engine (380 HP), the industry-leading hydraulic capacity, increased strength of the traction rod and the corresponding options PTO will help You quickly perform the required work!

Cab and controls

Maximum control
Exceptionally low noise level 68 dB(A) for a more relaxed working day Exceptionally low noise level 68 dB(A) for a more relaxed working day

When you sit in the cab CommandView III, the first thing you notice is the spaciousness, superior design and exceptional build quality and finish. By multi-layer glass and insulating front barrier reduced the noise level in the cockpit. Exceptionally low noise level 69 dB(A) reduces the voltage during the working day.

 

Visibility in the new cab is also better than ever, especially if you turn the seat at 40 degrees for almost unobstructed view of mounted equipment. CommandARM console ergonomically combined key functions of the tractor to control the transmission and engine and also to control the operation of the PTO (PTO), and selective control valves (SCV).

Seat rotated 40 degrees
Seat rotated 40 degrees Seat rotated 40 degrees

Unparalleled visibility and comfort are better than ever, especially when the seat is rotated 40 degrees to achieve nearly unobstructed view of mounted equipment. You will feel the difference from the first day of work.

System ActiveCommand steering (ACS)
Steering ActiveCommand reduces necessary for stress management Steering ActiveCommand reduces necessary for stress management

With optional steering ActiveCommand less effort is required to turn on headlands, in addition, it provides excellent handling characteristics on vehicle speeds.

  • Dynamic control of departure of the road wheels allows with minimal effort to keep the tractor on the path. The system automatically adjusts the angle of the running wheels.
  • Steering with adjustable gear ratio provides ease and flexibility of control at low speeds and more heavy control at higher speeds. ACS automatically reduces the number of turns of the steering wheel from lock-to-lock to 3.5 for fast maneuvers on headlands and reduces rotational movement of the steering wheel by 75 percent.
  • Fully electronic steering system eliminates all the disadvantages of traditional design “steering — wheel”. This significantly reduces vibration and eliminates backlash.
Remote control CommandARM

With a series 8R complex agricultural technologies were easy to use. All functions are within reach for the remote control CommandARM and clearly displayed on the CommandCenter 4-th generation.

All functions are within reach for the remote control CommandARM All functions are within reach for the remote control CommandARM

Ease of use

Thanks to the logically structured menu and an extensive quick access toolbar navigation has never been easier. And with Quick Line now you can record the route AB with just one click of a button.

 

Adjust the tractor 8R fit your needs

Select the 4100 CommandCenter display size 17.8 cm with CommandCenter AutoTrac activation or the 4600 CommandCenter with a size of 25.4 cm, which also allows you to upgrade to Premium CommandCenter activation.

 

ISOBUS certification of the Association of manufacturers of electronics for agriculture (AEF)

CommandCenter 4-th generation corresponds to the AEF ISOBUS standard. You can control appliances with support via a universal ISOBUS terminal (UT) and to carry out automatic section control via task Manager, Task Controller (TC-SC, TC-BAS) depending on the level of AEF certification of equipment.

 

Even faster access to advanced functions

The CommandCenter functions similar to the functions of a touch screen tablet; parameter navigation is facilitated by menus, shortcuts, and context sensitive help. And you can run our popular precision farming system, proven in the field.

 

Simple control valves SCV

CommandARM console the levers and connectors selective control valves (SCV) at the rear of the tractor are color-coded for easy recognition. For convenience, all valves SCV can be controlled by using under hand control levers valves SCV. All the levers of SCV can be easily reconfigure and save the settings separately for each application using the settings Manager Settings Manager.

 

Documentation made easier

CommandCenter 4600 connects to the operations Center on the portal MyJohnDeere.com with the function of wireless data transfer wireless Data Transfer (WDT). You can easily send configuration files from office to field, and used maps and the results of the work — from the field to the office.

 

Remote support

Your John Deere dealer or you have the ability to remotely connect to the CommandCenter 4th generation to help operators with the machine and with the setup and operation of equipment that support ISOBUS. In addition, auxiliary files on the screen allow operators to familiarize with all functions.

 

Field-proven steering system with support for automatic guidance system AutoTrac

To install on a tractor 6000 StarFire receiver and AutoTrac activation selection — everything you need for automated steering. Select from three levels of accuracy: SF1: +/- 15 cm; SF3: +/- 3 cm with seasonal recurrence; and in RTK: +/- 2.5 cm long-term repeatability.

Convenient travel functions with one monitor to another with the use of an additional monitor Convenient travel functions with one monitor to another with the use of an additional monitor

Additional monitor

Adding an extra monitor on the tractor allows you to easily move functions from one monitor to another to improve performance by simultaneously monitoring of all application tasks (e.g., monitoring of vehicle on the main display and control applications, precision farming systems on the secondary monitor).

Adjust the machine to fit your needs
Adjust the machine to fit your needs Adjust the machine to fit your needs

All daily tasks that the operator must control during their work, require the simultaneous use of different functions and levers. The new generation tractors of the series 8R allows for the remote control CommandArm to reconfigure almost all functions in accordance with the needs and requirements of the operator and job.

 

If instead 1 next SCV with lever controls the rear hitch I would like to control the front hitch — no problems! Using configuration management you can reconfigure all the hydraulic functions on the joystick or levers of SCV.

 

For improved operator comfort control of mounted implements with ISOBUS can be performed using the push buttons on the joystick. For the maximum level of migration can be easily set features such as an auxiliary device of the loader, the activation of AutoTrac, iTEC sequence control and switch gear, push buttons or joystick SCV, whereas SCV and front and rear hitches can be installed on the axis of the joystick.

 

And the most important — in the settings Manager Settings Manager to configure and restore all the settings separately for each mounted guns.

  1. Axis is available for the following functions:
    • Management of SCV
    • Front/rear hitch
  2. Switch available for the following functions:
    • Management of SCV
    • Front/rear hitch
  3. Push buttons 5-9 are available for the following functions:
    • The steering system AutoTrac function
    • Sequence 1-4 of the control system on headlands iTEC
    • ISOBUS functions with push-button control
    • Switching transmission (only transmission e23)

Navigation and precision farming

The AutoTrac automatic steering system
The AutoTrac automatic steering system enhances comfort and performance The AutoTrac automatic steering system enhances comfort and performance

The AutoTrac automatic steering system improves comfort; it surely is a tractor through the dirt or rough terrain day and night. This system prevents costly overlaps or gaps, so that each operator can perform cleaning at peak performance. In the presence of CommandCenter 4th generation StarFire receiver and the only thing required is a CommandCenter AutoTrac activation, and you can start work. Using AutoTrac, you can expect to reduce costs up to 8 per cent* and improve productivity by up to 14 percent**.

 

Receiver StarFire 6000

The unique StarFire 6000 receiver with a new level of precision, signal stability and repeatability provides for more options signals amendments:

  • The RTK accuracy of 2.5 cm pass-to-pass and long-term repeatability, including RTK-Extend feature preserve the original precision for 14 days for violation of line of sight or disable mobile network signal
  • Signal SF3, ensuring accuracy of 3 cm from pass to pass, and a seasonal recurrence within 9 months
  • Improved signal SF1 with an accuracy of 15 cm pass-to-pass, available without additional charge

 

* Source: “Lohnunternehmen” from 01.2010

** Source: “Landtechnik” from 06.2006

Improved navigation and precision farming

Exit on new level of application precision farming systems with the control system iTEC Pro, AutoTrac adding the function of automatic passage of turns on headlands. And with the system section control John Deere Section Control, you can perform the work of spraying, spreading and seeding with flawless precision even on wedge-shaped areas of the field.

Automatic u-turns on headlands to reduce soil compaction for stable growth of culture Automatic u-turns on headlands to reduce soil compaction for stable growth of culture

iTEC Pro

Rate the perfect topping band with a stable growth of the crop and reduced soil compaction. System iTEC Pro allows you to automate execution of u-turns on headlands, taking over the steering and control of the tractor, so you can relax.

System section control John Deere Section Control automatically minimizes skips and overlaps System section control John Deere Section Control automatically minimizes skips and overlaps

System section control John Deere Section Control

System section control John Deere Section Control automatically on the go minimizes skips and overlaps. This allows you to perform work better and faster, while saving money on fertilizers, chemicals and seeds. This system is compatible with the ISOBUS standard, is installed on the sprayers, seeders and spreaders, and allows you to control up to 255 separate sections.

Analysis of nutrients in the compost without stopping the machine using the system of determining the composition of liquid and organic fertilizers John Deere Manure Sensing Analysis of nutrients in the compost without stopping the machine using the system of determining the composition of liquid and organic fertilizers John Deere Manure Sensing

System John Deere Manure Sensing

Compost is high quality but very diverse fertilizer. Levels of nutrients may vary considerably before the factor of 25 — even within a single loading of the tank. System John Deere Manure Sensing enables you to analyze the nutrient content of the compost without stopping the machine, and therefore not far from the spreader. Sensor near-infrared range (NIR), mounted on tank for liquid fertilizer, measure the content of nitrogen (N), phosphorus (P), potassium (K) ammonium (NH₄) and dry matter due to more than 4000 measurements per second.On a John Deere tractor sensor can directly adjust the speed to increase or decrease the application rate given the desired target levels of nutrients while using prescription maps. This allows you to maximize productivity and ensure compliance with legislative requirements, and to reduce the cost of fertilizers.

The increase in traction independent link suspension (ILS) and tyres

Increased productivity
The improved traction means increased productivity The improved traction means increased productivity

The improved traction means increased productivity. Structural chassis for tractor series 8R is designed to transmit unprecedented power density. Thanks to the robust chassis, suspension ILS, which provides additional traction and long wheel base for added traction with the ground and stability, John Deere tractor series 8R give you more possibilities even in harsh conditions.

ILS suspension is designed to maximize power transfer to the ground ILS suspension is designed to maximize power transfer to the ground

Independent link suspension (ILS)

Automatically adjustable independent suspension front axle ILS is to maximize the power transfer to the ground for greater productivity, even in very uneven terrain.

Select the rear tyres with a diameter of 2.15 m to improve power transfer Select the rear tyres with a diameter of 2.15 m to improve power transfer

Tires

John Deere offers a wide variety of tire options for raznoobraznoi, and transportation. Select the rear tyres with a diameter of 2.15 m to improve power transfer and increased ground clearance. They will also provide sufficient traction with less ballast, which will reduce soil compaction and increase the payload capacity.

Excellent balance

The 8R series tractors have perfect weight distribution of 55:45. If necessary there is the option of ballasting with easy installation and removal.

The JDLink

JDLink Access shows where the machines are, what they do and what their performance. Using remote viewing of the display Remote Display Access (RDA) you or your dealer can remotely assist operators in the setup and use of the machine. JDLink Connect further includes a system of wireless data transfer wireless Data Transfer (WDT) for seamless data exchange between machine and office.

MyJobConnect simplifies the management of tasks MyJobConnect simplifies the management of tasks

Easy work

Get rid of paperwork and endless phone calls during work planning, as well as their implementation and reporting. Using MyJobConnect is to assign a clearly defined task for the operators using the application MyJobsManager. Operators can view work orders in real time and execute them properly using the MyJobs app on their mobile devices. And as soon as the work is completed, you will immediately receive an accurate and complete data for quick reporting and professional billing.

 

The operations center

Open the operations Centre to highlight the exact parts of the field for the following tasks, track the progress of machinery, to assign outfits to the operators to view maps of actual application rates are automatically sent from the field, and to create, to perform and report on work to trusted partners and customers.

 

Packages with connection

Tractor series 8R comes with pre-installed set of intelligent technologies that help to improve the profitability, level of comfort and reliability, while reducing operating costs*. This includes:

  • The 4600 CommandCenter display with activations or CommandCenter CommandCenter AutoTrac Premium
  • Free subscription to JDLink for 5 years
  • Access Center operations in the MyJohnDeere.com
  • An automatic control system for a tractor with mounted equipment Tractor Implement Automation
  • MyJobConnect or MyJobConnect Premium

 

All of the above and package FarmSight dealer for training on the use of these technologies and support our proposal for those who require a connection.

 

*NOTE: elements of the connection bundles are a limited promotional offer and suggest a temporary subscription.

Intelligent navigation for agriculture and logistics of the fleet of John Deere Intelligent navigation for agriculture and logistics of the fleet of John Deere

Intelligent navigation for agriculture and logistics fleet

The delivery of the right equipment at the right time in the right place is the secret to maximum efficiency and timeliness in the operation of several machines. MyJobConnect Premium MyJobConnect turns into a full-fledged solution for managing the logistics of a mixed fleet. This package includes an overview of fleet and turn by turn navigation based on an extensive database of field roads, indicating their estimated time of arrival of vehicles at the specified destination.For example, setting the route to the host machine allows the trailers to the silo approach to the forage harvester, the shortest and safe way and refreshes the routes of all units of the Park, as soon as the car moves to the next field.

Transmission

A wide selection of

The 8RT series tractors allow you to use the powertrain option for getting work done: transmission with infinitely variable speeds (IVT) AutoPowr and e23 PowerShift transmission.

AutoPowr IVT AutoPowr IVT

AutoPowr: four modes

For AutoPowr transmission available four different modes: fully automatic (Full Auto), custom (Custom), manual (Manual) and foot control (Pedal). The latter allows you to control the speed separate from the engine.

 

Transmission AutoPowr with AutoClutch

With the AutoClutch function you can just squeeze both brake pedals at any speed, the transmission will automatically gear shift to stop the tractor without using the clutch pedal.

 

AutoPowr: smooth shifting

AutoPowr allows you to smoothly change gears from initial to maximum speed with a single lever, it is absolutely not tripping the clutch. Simply select a specific speed and AutoPowr will always keep her automatically respond to changing load conditions.

AutoPowr allows you to smoothly change gears from initial to maximum speed AutoPowr allows you to smoothly change gears from initial to maximum speed

AutoPowr IVT

  1. The input shaft
  2. The first sun gear gear
  3. Second sun drive gear
  4. A drive gear planetary carrier
  5. Front double planetary node
  6. Node of the planetary carrier
  7. Planetary node brake reverse
  8. Couplings high and low speed
  9. The planetary output gear
  10. The switch Assembly drive gear C2/C1
  11. The hydrostatic module
  12. Coupler mechanical front drive (WFP)
  13. The output shaft WFP
  14. Parking brake
  15. Output rear differential
  16. The PTO shaft (PTO) and the output drive shaft of the pump
  17. The output of the auxiliary drive

 

The automatic response AutoPowr

AutoPowr allows you to smoothly start and speeds up to the maximum, absolutely not Cycling the clutch. The maximum speed is 40 km/h at 1360 rpm and 50 km/h at 1630 rpm for economical transportation.

 

Infinitely variable speed control in all situations

AutoPowr provides smooth shifting and constant power level across the stepless adjustable range of speeds, controlled by separate levers.

AutoPowr: excellent efficiency

Developed by John Deere’s exclusive AutoPowr transmission with four ranges consistently ensures maximum transfer of mechanical power in all speed ranges. Due to the flow of mechanical power from 55 to 100 percent transmission AutoPowr increases the efficiency of the tractor and transmits more power to the ground. Reduced hydraulic part has other positive effects: lower the requirement for cooling oil, a higher percentage of power transfer and higher efficiency of fuel consumption.

Easy operation: Transmission e23

We offer the choice of transmission most suitable to meet your needs. The e23 transmission is designed to provide maximum transfer of power to perform the agricultural tasks and transport on the roads. On the other hand, you can choose a full PowerShift transmission (16F/5R) or AutoPowr IVT transmission, characterized by intuitive functionality.

Industry-leading technology e23 Industry-leading technology e23

Industry-leading technology e23

Transmission e23 combines the advantages of a manual transmission and the ease of use of the AutoPowr transmission. Ten transmission fully power switching is available in the working range (5-16 km/h) maximum traction force in the field at optimum rpm.

 

E23 transmission with AutoClutch

With the AutoClutch function you can just squeeze both brake pedals at any speed, the transmission will automatically gear shift to a full stop.

 

Transmission e23 Manager performance (Efficiency Manager)

Manager performance Efficiency Manager allows the operator to preset the working speed and helps save fuel while maintaining the engine rpm at an optimum speed by automatically switching to a higher gear and drop of gas.

Transmission e23 has 23 forward and 11 speed gear reverse Transmission e23 has 23 forward and 11 speed gear reverse

Transmission e23

  1. The input shaft
  2. Coupling low speed
  3. Coupling a high speed (not visible)
  4. Clutch reverse speed
  5. Clutch speed S1
  6. Clutch speed S4
  7. Clutch speed S3 and S4 (not visible)
  8. Couplings high and low speed
  9. Clutch ranges R2
  10. Clutch ranges R3
  11. Hydrostatic pump and rear PTO PTO
  12. Parking brake
  13. Coupling WFP
  14. Output rear differential
  15. Front PTO PTO
  16. Auxiliary drive
E23 transmission with ten gears in the working range E23 transmission with ten gears in the working range

Ten transmission fully power shift in the working range

Ten gears in the working range from 5 to 16 km/h ensure perfect speed for the most demanding work on the tow, which leads to increased productivity in the field.

16-speed PowerShift transmission

16-speed PowerShift transmission is set on a small model to 8320R and has 16 forward and 5 reverse gears.